シスコ 100-105 問題サンプルを取得できる試験参考書
NO.1 Refer to the exhibit.
The DHCP settings have recently been changed on the DHCP server and the client is no longer able to
reach network resources. What should be done to correct this situation?
A. Issue the ipconfig command with the /release and /renew options in a command window.
B. Ping the default gateway to populate the ARP cache.
C. Use the tracert command on the DHCP client to first determine where the problem is located.
D. Verify that the DNS server address is correct in the DHCP pool.
E. Clear all DHCP leases on the router to prevent address conflicts.
Answer: A
100-105 模擬 100-105 答案
Explanation:
A PC will retain its DHCP assigned IP address until the lease time expires, which often times is 24
hours or more.
When changes are made to the DHCP server, the client should issue the ipconfig/release and then
ipconfig/renew commands to obtain a new IP address lease.
NO.2 Which commands display information about the Cisco IOS software version currently running
on a router? (Choose three)
A. show running-config
B. show stacks
C. show version
D. show flash
E. show IOS
F. show protocols
Answer: A,C,D
100-105 書籍 100-105 特典
NO.3 The hosts in the LAN are not able to connect to the Internet.
Which commands will correct this issue?
A. Option A
B. Option E
C. Option D
D. Option B
E. Option C
Answer: D
100-105 段階 100-105 指導
Explanation:
Do a "show ip int brief" and you will see that Fa0/1 has an IP address assigned, but it is shut down.
NO.4 Scenario:
You are a junior network engineer for a financial company, and the main office network is
experiencing network issues.
Troubleshoot the network issues.
Router R1 connects the main office to the internet, and routers R2 and R3 are internal routers.
NAT is enabled on router R1.
The routing protocol that is enabled between routers R1, R2 and R3 is RIPv2.
R1 sends the default route into RIPv2 for the internal routers to forward internet traffic to R1.
You have console access on R1, R2 and R3 devices. Use only show commands to troubleshoot the
issues.
R1 router clock is synchronized with ISP router R2 is supposed to receive NTP updates from R1. But
you observe that
R2 clock is not synchronized with R1. What is the reason R2 is not receiving NTP updates from R1?
A. R1 router Ethernet interface that is connected to R2 is placed in shutdown condition.
B. The IP address that is used in the NTP configuration on R2 router is incorrect.
C. The NTP server command not configured on R2 router.
D. R2 router Ethernet interface that is connected to R1 is placed in shutdown condition.
Answer: B
Explanation:
Check the below configuration for this
Ciscoの100-105 問題サンプルに合格するのは難しいですが、合格できるのはあなたの能力を証明できるだけでなく、国際的な認可を得られます。Ciscoの100-105 問題サンプルの準備は重要です。我々JapanCertの研究したCiscoの100-105 問題サンプルの復習資料は科学的な方法であなたの圧力を減少します。
親愛なる受験生の皆様、何かCiscoの100-105 問題サンプルのトレーニング授業に加入したいのですか。実は措置を取ったら一回で試験に合格することができます。JapanCertのCiscoの100-105 問題サンプルのトレーニング資料はとても良い選択なんですよ。JapanCertの仮想ネットワークトレーニングと授業は大量の問題集に含まれていますから、ぜひあなたが気楽に試験に合格することを約束します。
試験番号：100-105 合格問題試験科目：「Cisco Interconnecting Cisco Networking Devices Part 1 (ICND1 v3.0)」
最近更新時間：2017-06-02
問題と解答：310
JapanCertは最新のMB2-718問題集と高品質のC_THR83_1702問題と回答を提供します。JapanCertのC_THR86_1702 VCEテストエンジンと1z1-468試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のC-THR91-1611 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
記事のリンク：http://www.japancert.com/100-105.html
